Kidde Carbon Monoxide Detector, Battery Powered CO Alarm with LEDs, Test-Reset Button, Low Battery Indicator, Portable

Product Description The Kidde Carbon Monoxide Detector, Battery Powered CO Alarm with LEDs, Test-Reset Button, Low Battery Indicator, Portable, model 9CO5LP2, is a carbon monoxide detector that uses electrochemical sensor technology to detect carbon monoxide. The CO detector is powered by 2-AA alkaline batteries located in the back of the unit, providing easy installation & no wiring, plus coverage during a power failure. The alarm is conveniently designed and portable enough for travel - simply install it on a wall or place it on a tabletop. When carbon monoxide is detected, an 85-decibel alarm will sound & a red LED will flash. A green LED indicates that the alarm is receiving power. The test-hush button allows you to test the battery operations as well as temporarily silence the low battery chirp warning. Install a smoke detector & carbon monoxide detector on every level of your home and near bedrooms to help keep your family safe from fire & poisonous gas. UL Certified with a 10-year limited manufacturer's warranty. From the Manufacturer The Kidde KN-COB-B-LPM battery operated carbon monoxide alarm utilizes sophisticated electronic components to protect you and your family from the dangers of carbon monoxide. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the door without the batteries being installed. Inside cover of battery door features quick reference guide for what to do in case of an alarm. This easy-to-install alarm is suitable for all living areas and has a 7-year life and a 5-year limited warranty. The Kidde KN-COB-B-LPM provides you and your family with a loud warning signal against the dangers of elevated carbon monoxide levels in your home. The battery operated CO alarm provides continuous monitoring of CO levels, even during power outages when AC-only units are not providing protection. This unit is battery operated and has 3 AA batteries included. The test/reset button tests the unit for proper operation and also resets the carbon monoxide alarm. A low battery signal alerts users when the batteries needs to be replaced. A green LED flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before a CO reading is taken and when any button is pressed. A red LED will pulse and a loud alarm pattern will sound when a dangerous level of carbon monoxide is detected. The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated. The alarm alerts user to replace CO alarm after 7 years of operation.

• Electrochemical sensor technology detects CO gas
• Easy installation, no wiring needed, detects during a power failure by operating on 2-AA batteries (included); Install on a wall of your home or place on a tabletop
• Green LED indicates power to the carbon monoxide detector, while an 85-decibel alarm & a red LED indicates the presence of carbon monoxide
• Event Memory records the last time carbon monoxide was detected or when the unit was last tested