Little Giant 6-CIA-RFS 115 Volt, 1/3 HP, 2760 GPH Cast Iron Submersible Sump Pump with Piggyback Mechanical Float Switch, 10-Ft. Cord, Blue, 506171

The Little Giant 6 Series submersible epoxy-coated cast iron sump pumps are equipped with a 1/3 hp 115-volt, shaded pole, oil-filled motor with thermal overload protection and is designed for continuous duty. These pumps deliver up to 2760 gph (46 gpm) at 5' lift, have a shut-off of 18' and a maximum psi of 7.0. These pumps are equipped with a 1-1/2 FNPT discharge. The maximum fluid temperature is 140 °F. The 6-Series is cCSAus listed in the USA and Canada.The Little Giant 506171 6-CIA-RFS automatic sump pump with piggyback mechanical float switch is designed for sump systems, emergency water removal or water transfer. The mechanical float switch activates when the water level is between 9-1/2" and 11-1/2" and shuts off when the water level drops to between 1" and 4". The switch can easily be overridden for manual operation by unplugging the pump from the piggyback plug and plugging the pump directly into an outlet. This pump comes with a 10' cord. SWITCH OPTIONS TIPS:- Integral diaphragm switches are designed for sump systems only. Minimum basin diameter required is 10".- Mid-level integral diaphragm switches cycle more frequently. They are designed for shallow under sink or laundry tub systems. Minimum basin diameter required is 10".- Piggyback float switches are designed for sump systems, emergency water removal or water transfer applications. They can be switched to manual mode easily by unplugging the pump from the switch and plugging it directly into the outlet. Float switches require more room to activate the switch, the minimum basin diameter is 18".- Piggyback diaphragm switches are designed for sump systems, emergency water removal or water transfer applications; They can be switched to manual mode easily by unplugging the pump from the switch and plugging it directly into the outlet. The minimum basin diameter is 10".

• AUTOMATIC SUBMERSIBLE PUMP: Ideal for sump systems, emergency water removal or general dewatering applications
• BUILT TO LAST: Epoxy-coated cast iron housing; non-clog vortex style impeller; upper and lower bearings; nitrile/carbon/ceramic mechanical shaft seal
• CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada
• PIGGYBACK FLOAT SWITCH: allows pump to be switched to manual mode for emergency water removal or testing; activates when water reaches 9.5 - 11"; shuts off when water drops to 3 - 5"
• SPECIFICATIONS: 1/3 hp; 115 Volts; 50/60 Hz; 9.0 running Amps; 14.3 starting Amps; 720 Watts; 2760 gph at 5' lift; 18' shut-off; 7.8 PSI; 10' cord; 1.5" FNPT discharge; 140° max fluid temperature